You might also like

More about Fabrication and Optimization of 3D Printed Biomaterials

• Book details
• Synopsis
• Trending among others

You get 95 loyalty points

Book synopsis

This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples.

Book details

Book category Books in German Naturwissenschaften, Medizin, Informatik, Technik Technik Wärme-, Energie- und Kraftwerktechnik

• Full title: Fabrication and Optimization of 3D Printed Biomaterials
• Author: Manit Gera
• Language: English
• Binding: Paperback
• Number of pages: 64
• EAN: 9786203927184
• ISBN: 620392718X
• ID: 36701896
• Publisher: LAP LAMBERT Academic Publishing
• Weight: 113 g
• Dimensions: 220 × 150 × 4 mm
• Date of publishing: 29. June 2021

---

---

---